Last Updated on
Sheet Naming Convention – Updated
Sheet Identifiers are placed in the Title Block lower right of the drawing sheet. Sheet Identifiers contain a single position alpha code and are immediately followed by the drawing sheet sequence number. The alpha code references the discipline the sheet represents.
Digital storing of the final deliverable digital plan sheet shall be completed in .pdf form, 11×17 (scaled appropriately) and a single document per drawing sheet at 600 dpi. The below standard naming convention has been established.
The sheet identifier does need to be four characters long and the sheet identifier must contain the discipline code and sequence number as stated below. If there are more than 999 sheets per discipline, the sheet identifier can become five characters.
Sheet Identifiers with Discipline Codes
Discipline Codes correspond to the discipline the specific sheet represents. The discipline drawing numbers are sequential only for that specific discipline. These Standard Discipline codes represent most divisions within ODOT and shall be used. For any division that is not listed, please contact the Office Services Division for the appropriate Alpha Drawing Discipline Code.
| 0 | Title and Typical Section Sheets are exempt |
| AB | Sum. Pay Items and Notes (Bridge) |
| AE | Sum. Pay Items and Notes (Environmental) |
| AITS | Sum. Pay Items and Notes (Intelligent Transportation Systems) |
| AR | Sum. Pay Items and Notes and Summary Sheets (Roadway) |
| ARR | Sum. Pay Items and Notes (Railroad) |
| AT | Sum. Pay Items and Notes (Traffic) |
| AU | Sum. Pay Items and Notes (Utilities) |
| AV | Sum. Pay Items and Notes (Miscellaneous) |
| B | Bridge |
| BA | Aesthetics |
| E | Environmental |
| ITS | Intelligent Transportation Systems |
| R | Roadway |
| RR | Railroad |
| S | Survey |
| T | Traffic |
| U | Utilities |
| V | Miscellaneous |
| X | Cross Sections |
