
Figure 2C-1. Horizontal Alignment Signs
This figure shows 15 horizontal alignment signs. They are yellow
with black borders and legends.
W1-1 is shown as a diamond-shaped sign with a right-angled arrow
pointing up and to the left.
W1-2 is shown as a diamond-shaped sign with an arrow curving up
and to the left.
W1-3 is shown as a diamond-shaped sign with an upward-pointing
arrow with a 90-degree turn to the left and then a 90-degree turn
to the right, straightening to a vertical direction.
W1-4 is shown as a diamond-shaped sign with an upward-pointing
arrow that slants diagonally up and to the left and then straightens
to a vertical direction.
W1-5 is shown as a diamond-shaped sign with an upward-pointing
arrow that curves sharply to the right, to the left, to the right,
and then straightens to a vertical direction.
W1-6 is shown as a horizontal rectangular sign with a large horizontal
arrow pointing to the left.
W1-8 is shown as a vertical rectangular sign with a large chevron
arrow pointing to the left.
W1-10 is shown as a diamond-shaped sign with an arrow curving up
and to the right with a short diagonal line intersecting the curve
on the left.
W1-11 is shown as a diamond-shaped sign with an arrow curving to
the right and down to form a semicircle.
W1-13 is shown as a diamond-shaped sign with an arrow curving to
the right and down over a symbol of a truck tipped to the left at
a 45-degree angle.
W1-15 is shown as a diamond-shaped sign with an arrow curving to
the right and down and back upon itself in a circle.
W1-1a is shown as a diamond-shaped sign with a right-angled arrow
pointing up and to the right over the numerals "25." To
the right of this sign, the word "OR" is shown and another
sign. This is the same sign except the numerals shown are "40"
in a circle.
W1-2a is shown as a diamond-shaped sign with an arrow curving up
and to the right over the numerals "35." To the right
of this sign, the word "OR" is shown and another sign.
This is the same sign except the numerals shown are "60"
in a circle.
Back
to Chapter 2C
|