Chapter 7E. Crossing Supervision
Section 7E.01 Types
of Crossing Supervision
Support:
There are two types of school crossing supervision:
- Adult control of pedestrians and vehicles by
adult crossing guards or uniformed law enforcement officers; and
- Student control of only pedestrians with student
patrols.
Information for the organization, operation, and
administration of an adult crossing guard program are given in "Civilian
Guards For School Crossings" (available from the Center for
Public Safety of Northwestern University, 405 Church Street, Evanston,
IL 60204) and "Adult School Crossing Guards" (available
from the American Automobile Association, 1000 AAA Drive, Heathrow,
FL 32746).
Information for the organization, administration
and operation of a student patrol program are given in "Policies
and Practices for School Safety Patrols" (available from the
American Automobile Association, 1000 AAA Drive, Heathrow, FL 32746).
Section 7E.02 Adult
Crossing Guards
Option:
Adult crossing guards may be used to provide gaps in traffic at
school crossings where an engineering study has shown that adequate
gaps need to be created (see Section
7A.03), and where authorized by law.
Section 7E.03 Qualifications
of Adult Crossing Guards
Support:
High standards for selection of adult crossing guards are essential.
Guidance:
Adult crossing guards should possess the following qualifications:
- Average intelligence;
- Good physical condition, including sight, hearing, and mobility;
- Mental alertness;
- Neat appearance;
- Good character;
- Dependability; and
- Sense of responsibility for safety of students.
Section 7E.04 Uniform
of Adult Crossing Guards and Student Patrols
Guidance:
Adult crossing guards should be uniformed so that road users and
pedestrians can recognize them and respond to their signals. The
uniforms should be distinctively different from those worn by regular
law enforcement officers.
Standard:
Adult crossing guards shall wear high-visibility retroreflective
safety apparel labeled as ANSI 107-1999 standard performance for
Class 2 as described in Section
6E.02.
Student patrols shall wear high-visibility retroreflective
safety apparel labeled as ANSI 107-1999 standard performance for
Class 1 as described in Section 6E.02.
Guidance:
Law enforcement officers should wear high-visibility retroreflective
material over their uniforms when directing nighttime operations.
Section 7E.05 Operating
Procedures for Adult Crossing Guards
Guidance:
Adult crossing guards should not direct traffic in the usual law
enforcement regulatory sense. In the control of traffic, they should
pick opportune times to create a reasonably safe gap. At these times,
they should stand in the roadway to indicate that pedestrians are
about to use or are using the crosswalk, and that all vehicular
traffic must stop.
Adult crossing guards should use a STOP paddle.
The STOP paddle should be the primary hand-signaling device.
Standard:
The STOP paddle shall be an octagonal shape. The background of the
STOP face shall be red with at least 150 mm (6 in) series capital
white letters and border. The paddle shall be at least 450 mm (18
in) in size and have the word message STOP on both sides. The paddle
shall be retroreflectorized or illuminated when used during hours
of darkness.
Option:
The STOP paddle may be modified to improve conspicuity by incorporating
red or white flashing lights on both sides of the paddle. The red
or white flashing lights may be arranged in any of the following
patterns:
- Two red or white lights centered vertically above
and below the STOP legend;
- Two red or white lights centered horizontally
on each side of the STOP legend;
- One red or white light centered below the STOP
legend; or
- A series of eight or more small red or white
lights no larger than 6 mm (0.25 in) in diameter along the outer
edge of the paddle, arranged in an octagonal pattern at the eight
corners of the STOP paddle. More than eight lights may be used
only if the arrangement of the lights is such that it clearly
conveys the octagonal shape of the STOP paddle.
- A series of white lights forming the shapes of
the letters in the legend.
Standard:
If flashing lights are used on the STOP paddle, the flash rate shall
be at least 50, but not more than 60, flash periods per minute.
Section 7E.06 Uniformed
Law Enforcement Officers
Option:
Uniformed law enforcement officers may be used for school crossing
supervision.
Section 7E.07 Student
Patrols
Option:
Students patrols may be used to direct and control pedestrians at
crossings near schools where adequate gaps in traffic occur frequently
enough so that gaps do not need to be created.
Student patrols may be used to direct and control
pedestrians at signalized intersections where turning movements
are not a significant problem, and may be used to assist adult crossing
guards in the control of pedestrians at crossing locations used
by large numbers of pedestrians.
Guidance:
Student patrols should not be responsible for directing vehicular
traffic. They should not function as uniformed law enforcement officers
or adult crossing guards.
Section 7E.08 Choice
of Student Patrols
Guidance:
Student patrols should be carefully selected. They should be students
from the fifth grade or higher. Leadership and reliability should
be determining qualities for patrol membership.
Parental approval should be obtained in writing
before a student is used as a member of a student patrol.
Section 7E.09 Operating
Procedures for Student Patrols
Guidance:
Student patrols should use a flagging device to stop pedestrians
behind the curb or edge of the roadway, and should allow them to
cross only when there is an adequate gap in traffic.
Standard:
Flagging devices used during periods of twilight or darkness shall
be retroreflective or illuminated.
Because they are not authorized to direct vehicular
traffic, student patrols shall not use a STOP paddle.
Back to Top
|